Home > Products > Time & Frequency > FS730/5
Distribution Amplifier
FS730 & FS735 Broadband 75 Ω distribution amplifiers

FS730 & FS735 ... from $1450
×

FS735 Distribution Amplifiers

Front Panel

×

FS735 Distribution Amplifiers

Rear Panel

(Click to enlarge)
×

FS730 Distribution Amplifiers

Front Panel

×

FS730 Distribution Amplifiers

Rear Panel

(Click to enlarge)
  • Input protection
  • Flat frequency response to 100 MHz
  • Large dynamic range
  • Low noise
  • High current compliance
  • Overview
    The FS730/5 Series Distribution Amplifier are used to distribute broadband (DC to 100 MHz) analog signals over 75 Ω coax. The amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are dc coupled with a 75 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc.
    Quick Links
    Buy Online   Get a Quote

    FS730 & FS735 Broadband 75 Ω Distribution Amplifiers

    The FS730/5 Series Distribution Amplifier are used to distribute broadband (DC-100 MHz) analog signals over 75 Ω coax. The amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are dc coupled with a 75 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc.

    There are four indicator LEDs. The “power” LED indicates that the unit has AC power. The “signal” LED indicates that an input signal greater that 300 mV is present. The “overload” LED indicates that the input signal has exceeded ± 2 V.

    Small Signal Response

    ×

    FS730 & FS735

    Small Signal Response

    Large Signal Response

    ×

    FS730 & FS735

    Large Signal Response

    Phase Noise

    ×

    FS730 & FS735

    Additive Phase Noise

    Configuration

    The FS73x series of products can be configured as half-width, 1U, benchtop instruments (FS730) shown above, or in full-width, 1U, 19" rack-mount enclosures (FS735) shown below.

    The FS730/5 model provides 7 output BNC connectors on the front panel, and can be rack mounted with an optional rack mount kit.

    The FS735/5/5 model provides 14 output BNC connectors on the rear panel, with status indicators on the front panel. Several types of distribution amplifiers are available as listed below. Different types may be combined within the FS735 chassis.

    Option 1 - 10 MHz distribution amplifier
    Option 2 - 5 MHz distribution amplifier
    Option 3 - CMOS logic distribution amplifier
    Option 4 - Broadband 50 Ω distribution amplifier
    Option 5 - Broadband 75 Ω distribution amplifier
    Phone:(408)744-9040 • info@thinkSRS.comwww.thinkSRS.com