Home > Products > Scientific Instruments > SR200
Boxcar Averager
SR200 Gate scanner for SR250 and SR255

SR200 ... from $1000
×

SR200 Gate Scanner

Front Panel

 
×

SR200 Gate Scanner

Rear Panel

(Click to enlarge)
  • Gate scanner for SR250 and SR255
  • Forward/reverse scans
  • Repeat/single-shot scans
  • Pen lift output
  • Scan times from 10 ms to 5 minutes
  • Variable scan width control
  • Overview
    The SR200 Gate Scanner module is designed to automate waveform recovery with the SR250 and SR255 Gated Integrator modules. Waveform recovery is done by slowly scanning the gate of the integrator over the waveform of interest. Both the SR250 and SR255 modules have external gate delay control inputs. The SR200 provides an adjustable ramp voltage needed to scan the gates using these inputs.
    Quick Links
    Buy Online   Get a Quote

    SR200 Gate Scanner

    The SR200 Gate Scanner module is designed to automate waveform recovery with the SR250 and SR255 Gated Integrator modules. Waveform recovery is done by slowly scanning the gate of the integrator over the waveform of interest. Both the SR250 and SR255 modules have external gate delay control inputs. The SR200 provides an adjustable ramp voltage needed to scan the gates using these inputs. The initial and final delays, as well as the scan time, are fully adjustable. Single or repeated scans may be performed in the forward or reverse direction over any portion of the waveform. Scan times from 10 milliseconds to 5 minutes may be selected.

    In addition to the delay control output, the SR200 has a 0 to 10 volt X-axis ramp output designed to drive the X-axis of a chart recorder or an oscilloscope.

    Phone:(408)744-9040 • info@thinkSRS.comwww.thinkSRS.com