info@thinkSRS.com (408) 744-9040
(408) 744-9040
Home > Products > Scientific Instruments > SR550
Preamplifier
SR550 — FET input preamplifier
SR550 ... from  $750
Preamplifier
SR550 — FET input preamplifier
SR550 ... from  $750
SR550 ... from  $750
 
BUY / QUOTE
BUY / QUOTE
  • 3.6 nV/√Hz input noise
  • FET input, 100 MΩ input impedance
  • Gain of 1, 2, 5 or 10
  • Single-ended and differential inputs
  • AC coupled input
  • Powered by SRS lock-in amplifiers
  • High common mode rejection
  • 3.6 nV/√Hz input noise
  • 100 MΩ (FET) input impedance
  • Gain of 1, 2, 5 or 10
  • Single-ended & differential inputs
  • AC coupled input
  • Powered by SRS lock-ins
  • High common mode rejection
  • 3.6 nV/√Hz input noise
  • FET input, 100 MΩ input impedance
  • Gain of 1, 2, 5 or 10
  • Single-ended and differential inputs
  • AC coupled input
  • Powered by SRS lock-in amplifiers
  • High common mode rejection
          X

SR550 Preamplifier

Overview
The SR550 Voltage Preamplifier is designed to work with any SRS lock-in amplifier. Preamplifiers provide gain close to the experimental detector, before the signal-to-noise ratio is permanently degraded by cable capacitance and pickup. The preamplifier minimizes noise and pickup in the connecting lines and reduces measurement time in noise-limited experiments.
          X

SR550 Preamplifier

Front Panel

          X

SR550 Preamplifier

SR550 FET Preamplifier

The SR550 Voltage Preamplifier is designed to work with any SRS lock-in amplifier. Preamplifiers provide gain close to the experimental detector, before the signal-to-noise ratio is permanently degraded by cable capacitance and pickup. The preamplifier minimizes noise and pickup in the connecting lines and reduces measurement time in noise-limited experiments. When used with the SR510 or SR530, the preamplifier gain is automatically chosen to optimize noise performance without compromising dynamic reserve. When used with the any SRS lock-in, the preamplifier gain is automatically set to its maximum value. Power and control signals are brought from the lock-in by a 9-pin cable (included). The SR550 may also be operated independently from the lock-ins by applying appropriate biasing (±20 VDC, +5 VDC).

Noise vs. Frequency

          X

Noise vs. Frequency

SR550 FET Preamplifier